Trust the Process

For Regular Plaster

  1. Drain pool to street and remove cap in main drain to release ground water while work is being conducted.

  2. Chip interior pool. (Remove tile/coping if is applicable)

  3. Bacteria can grow in between the cracks and holes of the old pool plaster and it can end up with rotting plaster, bubbling plaster, or stained new plaster. Acid/pressure washing need to be done before applying bondkote to prevent these issues.

  4. Apply bondkote.

  5. The tile/coping of the customer's choice will be installed. If is applicable.

  6. Pool will be plastered with one coat of plaster approximately 1/2" to 5/8" thickness.

  7. The pool is filled immediately using owner's garden hose and water.

-white or any color plaster-

For a Pebble Finish

  1. Drain pool to street and remove cap in main drain to release ground water while work is being conducted.

  2. Chip interior pool. (Remove tile/coping if is applicable)

  3. Bacteria can grow in between the cracks and holes of the old pool plaster, and it can end up with rotting plaster, bubbling plaster, or stained new plaster. Acid/pressure washing need to be done before applying bondkote to prevent these issues.         

  4. Apply bondkote before plastering.

  5. The tile/coping of the customer's choice will be installed. If is applicable.           

  6. Acid wash need to be done to expose the pebbles.  

  7. Pool will be plastered with one coat of plaster approximately 1/2" to 5/8" thickness.

  8. The pool is filled immediately using owner's garden hose and water.